Free Shipping by DHL/UPS Express Free Shipping by DHL/UPS Express

FA18.2*5.9 Push Type Prop-2PCS/PAIR

148.90

Available points: 7000 Points Points reward: 148 Points

  • Detail information
  • Specifications

foldable carbon fiber prop

design improves the efficiency for longer flight

special design of winglet is employed to weaken the vortex and improve the efficiency

tighten fitted screws and locknut to improve safety performance

precise positioning,convenient for storage and transportation

push version propeller is special use on the bottom side of a coaxial frame

Technical Drawing

15-18.jpg

Specification
Model No.18.2*5.9(462.3*149.9mm)LIGPOWER SeriesFoldable
Weight(Single Blade)40gMaterialCF+Epoxy
Thrust Limitation8kgAmbient Temp-40℃~65℃
Optimum RPM3000-6000 RPM/minStorage Temp/Humidity-10℃~50℃/<85%
Surface TreatmentGlossy

Packing List

包装.jpg

Before using this product, please check if all the items listed above are included in the packaging. If there are any missing items, please contact our online customer service or leave message to " onlinesales@ligpower.com " in time.
Note

1. Prop marked with “L" is for CW which "R" for CcW (aerial view).    

2. Please be careful when using the propellers as the spinning propellers may cause serious injury.    

3. The structural strength of the propellers are fully tested, please make sure the propellers are not used beyond the limits. Please do not tempt to test the strength of the propellers by bending them by hands. Any damage or loss from improper use will be on the users'account.    

4. Please make sure all the accessories are mounted properly.    

5. Please check on the propellers before flight and make sure they are in good condition. Please replace propellers with new ones if fault is found with them.    

6. For storage, please keep them away from hostile environments including but not limited to that of H2 0, SO2,NO2,Cl2 , organosilicon, cyanogroup and phenol. Ambient temperature is recommended between 0 and 40℃ at less than 80% humidity.    

7. Please apply anaerobic screw locking glue of medium or above strength when install propellers onto motors.    

8. Please use the propellers in compliance with local laws and regulations.